How do our MEP BIM Services deliver coordinated Revit models?
Tesla CAD UK produces accurate, parametric and information-rich MEP BIM models from your supplied 2D drawings, design documents, Revit files, IFC models or point-cloud data.
Using Autodesk Revit, and Navisworks workflows, we develop Mechanical, Electrical, Plumbing and Fire Protection models with the right geometry, system connectivity, project-specific tolerances, coordinated service clearances and appropriate LOD for each design, construction or as-built stage.
Our ISO 19650-aligned deliverables can include RVT models, IFC/NWC exports, coordinated MEPF models, drawing extractions, schedules, quantity take-off data, COBie information and FM-ready asset attributes for downstream coordination, shop drawings, clash detection and handover.
Which Mechanical, Electrical, Plumbing and Fire Protection Systems do we model?
Our MEP BIM modellers work across the full range of building services systems. The table below shows the specific components and system types we model within each discipline, produced from your drawings and built to the LOD your project requires.
Mechanical / HVAC
- Air Handling Units
- VAV Boxes & FCUs
- Ductwork & Fittings
- Chilled Water Pipework
- LTHW Pipework
- Pressurisation Units
- Diffusers & Grilles
- Smoke Extract Systems
Electrical
- Cable Tray & Ladders
- Distribution Boards
- Lighting Fixtures
- Power & Small Power
- Switchgear & Panels
- EV Charging Points
- Solar PV & Inverters
- Earthing & Bonding
Plumbing
- DHW & CW Pipework
- Soil & Waste Drainage
- Plumbing Fixtures
- Storm Water Drainage
- Pump & Valve Assemblies
- Medical Gas Systems
- Compressed Air Systems
- Riser Diagrams & Spools
Fire Protection
- Sprinkler Heads & Pipes
- Wet & Dry Risers
- Fire Alarm Devices
- Suppression Systems
- Hose Reels
- Fire Dampers & Actuators
- Penetration Seals
- Pump Station Layouts
What are the MEP BIM deliverables provided at each LOD?
Our MEP BIM models are produced at the Level of Detail specified in your BIM Execution Plan or project brief. Each LOD level carries a defined set of geometric and data attributes, ensuring the model is fit for its intended purpose at every project stage.
Conceptual massing, with space allocation and system zones. Used for feasibility and early design stage.
Approximate system geometry and equipment placement. Generic families at indicative sizes and positions.
Accurate geometry, correct equipment sizes, system routing and connections. Ready for coordination.
Connections, interfaces, hanger positions, and penetration data. This is the Construction coordination standard.
Full fabrication detail, with manufacturer data, part numbers, weld specs, and fabrication-ready geometry.
As-built model, verified against installed conditions. FM handover, O&M, and asset management use.
Which MEP BIM Services does Tesla CAD UK provide?
Mechanical BIM Modelling - HVAC
Full parametric Revit MEP models of HVAC systems, including ductwork, air handling units, VAV boxes, fan coil units, chilled water and LTHW pipework, pressurisation units, smoke extract systems, and plantroom equipment, produced from your design drawings to the specified LOD.
Electrical BIM Modelling
Electrical Revit MEP models covering cable tray and containment, distribution boards, switchgear, lighting fixtures, small power, EV charging infrastructure, solar PV systems, and data and communications containment, built from your electrical layout drawings and schedules.
Plumbing & Drainage BIM Modelling
Revit MEP models for domestic hot and cold water systems, soil and waste drainage, storm water, pump and valve assemblies, plumbing fixtures, riser diagrams, isometrics, compressed air, and medical gas systems, created from your plumbing design documentation.
Fire Protection BIM Modelling
Fire protection Revit MEP models, including sprinkler systems, wet and dry risers, hose reels, suppression systems, fire alarm devices and cabling, fire dampers, and penetration seals, produced to LPC standards from your design drawings.
Fully Coordinated Multi-Discipline MEP Model
Complete MEPF Revit model combining all four disciplines in a single coordinated file; built from your design documentation, coordinated against the structural and architectural models, and delivered clash-resolved with coordinated 2D drawing extractions.
MEP As-Built BIM Modelling from Point Cloud
Conversion of 3D laser scan point cloud data into accurate as-built MEP Revit models, mapping the installed positions of ductwork, pipework, cable trays, and equipment for refurbishment, renovation, retrofit, and FM handover projects.
MEP Revit Family Creation
Custom parametric Revit MEP families for HVAC equipment, electrical components, plumbing fixtures, and fire protection devices, built to the correct LOD with appropriate parameters and product data, for use in your MEP model or BIM content library.
Quantity Take-Off from MEP BIM Model
Accurate material and equipment quantity take-offs extracted directly from the MEP BIM model, delivered as formatted Excel schedules or embedded Revit schedules, used for cost estimation, procurement planning, and project budgeting.
Projects that prove it.
TVC Tower - 700,000 sq ft Broadcast Complex, London
Full MEP coordination for an 11-level broadcast and office building, delivered 40% ahead of a schedule that had already been cut by a third.
6,000 hours · 180 working days · London, UK Explore Case Study
Battersea Power Station - 250+ Residential Units
LOD 350 MEP coordination inside a Grade II* listed building, from a brief with no schematics and a two-week deadline.
61,000 m² · LOD 350 · London, UK Explore Case Study
Payne Hicks Beach - Lincoln’s Inn Office Refurbishment
Six photorealistic renders for a 500 m² office refurbishment, produced from presentation images only, with no source CAD data.
500 m² · 6 renders · London, UK Explore Case StudyHow does Tesla CAD UK deliver an MEP BIM model?
- Project Brief & LOD Agreement
- Input Review & Fee Proposal
- MEP Model Production
- Internal Quality Check
- Client Review & Revisions
- Final Delivery
Who uses our MEP BIM Services?
Which Project Sectors Do We Serve with MEP BIM Services?
Why do clients choose Tesla CAD UK for MEP BIM Modelling?
Below UK BIM Rates
India's engineering talent pool enables us to deliver MEP BIM at a cost that UK studios cannot match, all without compromising on the quality.
UK Registered Company
Full legal accountability and professional standards of a UK firm, with the data security and contractual certainty that main contractor and developer clients require.
ISO 19650 & BS 1192 Compliance
All models are structured to meet ISO 19650 and BS 1192 requirements, with correct naming, file structure, LOD compliance, and COBie output where required.
MEP-Qualified Engineering Team
Our modellers are qualified MEP engineers. Every system is produced with an engineer's understanding of how it works, how it routes, and where the conflicts are likely to arise.
NDA on Every Project
Your drawings, design data, and project details are fully confidential throughout and deleted from our systems on request at project close.
What Do Clients Ask Before Starting an MEP BIM Project?
Which BIM services support MEP BIM modelling?
Tesla CAD UK provides all of the following as dedicated standalone services, giving you a single, consistent delivery partner across your entire BIM and CAD programme.
Streamline operations and drive efficiency with our world-class expertise
Years of Experience
Countries Served
Happy Clients
Successful Projects
We deliver MEP BIM Modelling Services across the UK
Get In Touch
We are always ready to help you and answer your questions
- We provide specialized BIM engineering services throughout the UK, Ireland, Scandinavia, and mainland Europe.
- All projects are protected under strict Non-Disclosure Agreements (NDA).
- 100% Data Security and confidentiality assured.
- Guaranteed response within 24 hours or less.